Test Method: ASTM D2699, ASTM D2700

REFRIGERATED AIR DEHUMIDIFIER for OCTANE KNOCK ENGINES

• In Conformance with ASTM D2699, D2700, D2885
.....Methods

• Replaces the Ice Tower for CFR Engine Air .....Dehumidifying

• Condensate Pan Constructed of Stainless Steel 

• Chilled Liquid Reservoir and Pump for Cooling the CFR .....Carburetor

• Digital Display Temperature Control:

- of the Dehumidified Air Entering the Humidifier Pipe
- of the Liquid Reservoir for Cooling the Carburetor and the Sample Bowl

• Shipped Fully Assembled

Click for Lab Octane Engine Automation
Click for Automated Reference Fuel Blenders




Model 500 is a refrigerated system replacing the conventional ice tower used for dehumidifying the intake air to the CFR octane knock engine (lab as well as on-line engines). Room air is filtered as it is drawn into the unit by the CFR carburetor. It is designed to chill the inlet air to 1.5° to 3.5°C. The temperature is adjustable via a front mounted digital indicating controller.

The unit uses ozone friendly, commonly available refrigerant.

A separate 8.5 liter liquid, well insulated reservoir is also chilled by the same refrigeration system. It is controlled by a front mounted digital controller and can be cooled as low as -10°C with temperature stability of ±0.5°C. The reservoir temperature is quickly adjustable. The reservoir is equipped with a pump to circulate the cooling fluid to the engine's carburetor as well as to test fuel bowl if it requires chilling.

The compact, lockable caster mounted cabinet measures about 24 inches square at the base. For protection against corrosion, it is constructed of anodized aluminum framing with side panels of painted aluminum-plastic composite. An important feature is the stainless steel construction of the condensation pan for long life with protection against rusting. The condensate drains via a plastic tube to a floor drain.

Model 500 comes fully assembled and is ready for connection to the Waukesha supplied humidifier tube leading to the carburetor. It also comes equipped with all needed plastic tubing for connection to the carburetor via a front mounted quick disconnect in and out couplings. The tubing is insulated to prevent sweating. A separate set of connections is provided by quick disconnect couplings for hoses for chilling the sample fuel bowl.

The easily accessible, front mounted control panel includes main power switch, power switch for the pump, and two digital display controllers (air temperature and liquid reservoir temperature).

Model 500 is available for 220 volts, 50 or 60 Hz as well as for 115 volts, 60 Hz.


Specifications are subject to change without notice.

Lawler Manufacturing Corporation © 2005